�
�Udac @` s� d d l m Z m Z m Z e Z i d d 6d g d 6d d 6Z d Z d Z d
Z d d l
m Z d d l m
Z
m Z d
� Z e d k r� e � n d S( i ( t absolute_importt divisiont print_functions 1.1t metadata_versiont previewt statust certifiedt supported_bys�
---
module: ucs_vlans
short_description: Configures VLANs on Cisco UCS Manager
description:
- Configures VLANs on Cisco UCS Manager.
- Examples can be used with the UCS Platform Emulator U(https://communities.cisco.com/ucspe).
extends_documentation_fragment: ucs
options:
state:
description:
- If C(present), will verify VLANs are present and will create if needed.
- If C(absent), will verify VLANs are absent and will delete if needed.
choices: [present, absent]
default: present
name:
description:
- The name assigned to the VLAN.
- The VLAN name is case sensitive.
- This name can be between 1 and 32 alphanumeric characters.
- "You cannot use spaces or any special characters other than - (hyphen), \"_\" (underscore), : (colon), and . (period)."
- You cannot change this name after the VLAN is created.
required: yes
multicast_policy:
description:
- The multicast policy associated with this VLAN.
- This option is only valid if the Sharing Type field is set to None or Primary.
default: ''
fabric:
description:
- "The fabric configuration of the VLAN. This can be one of the following:"
- "common - The VLAN applies to both fabrics and uses the same configuration parameters in both cases."
- "A — The VLAN only applies to fabric A."
- "B — The VLAN only applies to fabric B."
- For upstream disjoint L2 networks, Cisco recommends that you choose common to create VLANs that apply to both fabrics.
choices: [common, A, B]
default: common
id:
description:
- The unique string identifier assigned to the VLAN.
- A VLAN ID can be between '1' and '3967', or between '4048' and '4093'.
- You cannot create VLANs with IDs from 4030 to 4047. This range of VLAN IDs is reserved.
- The VLAN IDs you specify must also be supported on the switch that you are using.
- VLANs in the LAN cloud and FCoE VLANs in the SAN cloud must have different IDs.
- Optional if state is absent.
required: yes
sharing:
description:
- The Sharing Type field.
- "Whether this VLAN is subdivided into private or secondary VLANs. This can be one of the following:"
- "none - This VLAN does not have any secondary or private VLANs. This is a regular VLAN."
- "primary - This VLAN can have one or more secondary VLANs, as shown in the Secondary VLANs area. This VLAN is a primary VLAN in the private VLAN domain."
- "isolated - This is a private VLAN associated with a primary VLAN. This VLAN is an Isolated VLAN."
- "community - This VLAN can communicate with other ports on the same community VLAN as well as the promiscuous port. This VLAN is a Community VLAN."
choices: [none, primary, isolated, community]
default: none
native:
description:
- Designates the VLAN as a native VLAN.
choices: ['yes', 'no']
default: 'no'
requirements:
- ucsmsdk
author:
- David Soper (@dsoper2)
- CiscoUcs (@CiscoUcs)
version_added: '2.5'
s'
- name: Configure VLAN
ucs_vlans:
hostname: 172.16.143.150
username: admin
password: password
name: vlan2
id: '2'
native: 'yes'
- name: Remove VLAN
ucs_vlans:
hostname: 172.16.143.150
username: admin
password: password
name: vlan2
state: absent
s
#
( t
AnsibleModule( t UCSModulet ucs_argument_specc
C` sL t } | j d t d d d t � d t d d d d � d t d d d d d
d d d g � d
t d d � d t d d d d d
d d d d g � d t d d d d d
d d g � d t d d d d d
d d g � � t | d t d d d d
g g g �} t | � } t } d d l m } t } y�t } t } d } | j d d k re| d | j d 7} n | d | j d } | j
j | � }
|
r�t } n | j d d k r�| r�| j s�| j
j
|
� | j
j � n t } q�n� | rSt d
| j d
� } | j d | d <| j d | d <| j d | d! <|
j | � rSt } qSn | s�| j s�| d"