Anons79 Mini Shell

Directory : /lib/python2.7/site-packages/ansible/modules/network/onyx/
Upload File :
Current File : //lib/python2.7/site-packages/ansible/modules/network/onyx/onyx_command.pyc

�
�Udac@`s�ddlmZmZmZeZidd6dgd6dd6ZdZd	Zd
Z	ddl
Z
ddlmZdd
l
mZddlmZddlmZddlmZd�Zd�Zd�Zedkr�e�ndS(i(tabsolute_importtdivisiontprint_functions1.1tmetadata_versiontpreviewtstatust	communitytsupported_bys�
---
module: onyx_command
extends_documentation_fragment: onyx
version_added: "2.5"
author: "Samer Deeb (@samerd)"
short_description: Run commands on remote devices running Mellanox ONYX
description:
  - Sends arbitrary commands to an Mellanox ONYX network device and returns
    the results read from the device. This module includes an
    argument that will cause the module to wait for a specific condition
    before returning or timing out if the condition is not met.
  - This module does not support running commands in configuration mode.
    Please use M(onyx_config) to configure Mellanox ONYX devices.
notes:
  - Tested on ONYX 3.6.4000
options:
  commands:
    description:
      - List of commands to send to the remote Mellanox ONYX network device.
        The resulting output from the command
        is returned. If the I(wait_for) argument is provided, the
        module is not returned until the condition is satisfied or
        the number of retries has expired.
    required: true
  wait_for:
    description:
      - List of conditions to evaluate against the output of the
        command. The task will wait for each condition to be true
        before moving forward. If the conditional is not true
        within the configured number of retries, the task fails.
        See examples.
  match:
    description:
      - The I(match) argument is used in conjunction with the
        I(wait_for) argument to specify the match policy.  Valid
        values are C(all) or C(any).  If the value is set to C(all)
        then all conditionals in the wait_for must be satisfied.  If
        the value is set to C(any) then only one of the values must be
        satisfied.
    default: all
    choices: ['any', 'all']
  retries:
    description:
      - Specifies the number of retries a command should by tried
        before it is considered failed. The command is run on the
        target device every retry and evaluated against the
        I(wait_for) conditions.
    default: 10
  interval:
    description:
      - Configures the interval in seconds to wait between retries
        of the command. If the command does not pass the specified
        conditions, the interval indicates how long to wait before
        trying the command again.
    default: 1
sk
tasks:
  - name: run show version on remote devices
    onyx_command:
      commands: show version

  - name: run show version and check to see if output contains MLNXOS
    onyx_command:
      commands: show version
      wait_for: result[0] contains MLNXOS

  - name: run multiple commands on remote nodes
    onyx_command:
      commands:
        - show version
        - show interfaces

  - name: run multiple commands and evaluate the output
    onyx_command:
      commands:
        - show version
        - show interfaces
      wait_for:
        - result[0] contains MLNXOS
        - result[1] contains mgmt1
s�
stdout:
  description: The set of responses from the commands
  returned: always apart from low level errors (such as action plugin)
  type: list
  sample: ['...', '...']
stdout_lines:
  description: The value of stdout split into a list
  returned: always apart from low level errors (such as action plugin)
  type: list
  sample: [['...', '...'], ['...'], ['...']]
failed_conditions:
  description: The list of conditionals that have failed
  returned: failed
  type: list
  sample: ['...', '...']
N(t
AnsibleModule(tConditional(tComplexList(tstring_types(trun_commandscc`sAx:|D]2}t|t�r4t|�jd�}n|VqWdS(Ns
(t
isinstanceRtstrtsplit(tstdouttitem((sM/usr/lib/python2.7/site-packages/ansible/modules/network/onyx/onyx_command.pytto_lines~s
cC`s�ttdtdt�dt�dt��|�}||jd�}x|t|�D]n}|jr�|djd�r�|jd|d�|j|�qS|djd�rS|j	d	d
�qSqSW|S(NtcommandtkeytprompttanswertcommandstshowsJonly show commands are supported when using check mode, not executing `%s`tconftmsgs[onyx_command does not support running config mode commands.  Please use onyx_config instead(
R
tdicttTruetparamstlistt
check_modet
startswithtappendtremovet	fail_json(tmoduletwarningsRRR((sM/usr/lib/python2.7/site-packages/ansible/modules/network/onyx/onyx_command.pytparse_commands�s 					cC`s!tdtdddt�dtdd�dtddd	dd
g�dtdddd
�dtdddd
��}td|dt�}itd6}t�}t||�}||d<|jdp�t�}g|D]}t|�^q�}|jd}|jd}	|jd}
x�|dkr�t||�}xIt|�D];}||�r=|
d
krht�}Pn|j	|�q=q=W|s�Pnt
j|	�|d8}qW|r�g|D]}|j^q�}
d}|j
d|d|
�n|jitd6|d6tt|��d6�|j|�dS(s*main entry point for module execution
    RttypeRtrequiredtwait_fortmatchtdefaulttalltchoicestanytretriesi
tinttintervalit
argument_spectsupports_check_modetchangedR%is:One or more conditional statements have not been satisfiedRtfailed_conditionsRtstdout_linesN(RRRtFalseRR&RR	RR"ttimetsleeptrawR#tupdateRt	exit_json(R2R$tresultR%RR)tctconditionalsR/R1R*t	responsesRR5R((sM/usr/lib/python2.7/site-packages/ansible/modules/network/onyx/onyx_command.pytmain�sL	
	



	
	t__main__(t
__future__RRRR't
__metaclass__tANSIBLE_METADATAt
DOCUMENTATIONtEXAMPLEStRETURNR8tansible.module_utils.basicRt+ansible.module_utils.network.common.parsingR	t)ansible.module_utils.network.common.utilsR
tansible.module_utils.sixRt&ansible.module_utils.network.onyx.onyxRRR&RAt__name__(((sM/usr/lib/python2.7/site-packages/ansible/modules/network/onyx/onyx_command.pyt<module>s$


:			;

Anons79 File Manager Version 1.0, Coded By Anons79
Email: [email protected]