Anons79 Mini Shell

Directory : /lib/python2.7/site-packages/ansible/modules/network/nxos/
Upload File :
Current File : //lib/python2.7/site-packages/ansible/modules/network/nxos/nxos_l2_interfaces.pyc

�
�Udac@`s�dZddlmZmZmZeZidd6dgd6dd6Zd	Zd
Z	dZ
ddlmZdd
l
mZddlmZd�Zedkr�e�ndS(s(
The module file for nxos_l2_interfaces
i(tabsolute_importtdivisiontprint_functions1.1tmetadata_versiontpreviewtstatustnetworktsupported_bys�
---
module: nxos_l2_interfaces
version_added: 2.9
short_description: Manages Layer-2 Interfaces attributes of NX-OS Interfaces
description: This module manages Layer-2 interfaces attributes of NX-OS Interfaces.
author: Trishna Guha (@trishnaguha)
notes:
  - Tested against NXOS 7.3.(0)D1(1) on VIRL
options:
  config:
    description: A dictionary of Layer-2 interface options
    type: list
    elements: dict
    suboptions:
      name:
        description:
          - Full name of interface, i.e. Ethernet1/1.
        type: str
        required: true
      access:
        description:
          - Switchport mode access command to configure the interface as a
            Layer-2 access.
        type: dict
        suboptions:
          vlan:
            description:
            - Configure given VLAN in access port. It's used as the access
              VLAN ID.
            type: int
      trunk:
        description:
          - Switchport mode trunk command to configure the interface as a
            Layer-2 trunk.
        type: dict
        suboptions:
          native_vlan:
            description:
              - Native VLAN to be configured in trunk port. It is used as the
                trunk native VLAN ID.
            type: int
          allowed_vlans:
            description:
              - List of allowed VLANs in a given trunk port. These are the only
                VLANs that will be configured on the trunk.
            type: str

  state:
    description:
      - The state of the configuration after module completion.
    type: str
    choices:
      - merged
      - replaced
      - overridden
      - deleted
    default: merged
s�

# Using merged

# Before state:
# -------------
#
# interface Ethernet1/1
#   switchport access vlan 20
# interface Ethernet1/2
#   switchport trunk native vlan 20
# interface mgmt0
#   ip address dhcp
#   ipv6 address auto-config

- name: Merge provided configuration with device configuration.
  nxos_l2_interfaces:
    config:
      - name: Ethernet1/1
        trunk:
          native_vlan: 10
          allowed_vlans: 2,4,15
      - name: Ethernet1/2
        access:
          vlan: 30
    state: merged

# After state:
# ------------
#
# interface Ethernet1/1
#   switchport trunk native vlan 10
#   switchport trunk allowed vlans 2,4,15
# interface Ethernet1/2
#   switchport access vlan 30
# interface mgmt0
#   ip address dhcp
#   ipv6 address auto-config


# Using replaced

# Before state:
# -------------
#
# interface Ethernet1/1
#   switchport access vlan 20
# interface Ethernet1/2
#   switchport trunk native vlan 20
# interface mgmt0
#   ip address dhcp
#   ipv6 address auto-config

- name: Replace device configuration of specified L2 interfaces with provided configuration.
  nxos_l2_interfaces:
    config:
      - name: Ethernet1/1
        trunk:
          native_vlan: 20
          trunk_vlans: 5-10, 15
    state: replaced

# After state:
# ------------
#
# interface Ethernet1/1
#   switchport trunk native vlan 20
#   switchport trunk allowed vlan 5-10,15
# interface Ethernet1/2
#   switchport trunk native vlan 20
#   switchport mode trunk
# interface mgmt0
#   ip address dhcp
#   ipv6 address auto-config


# Using overridden

# Before state:
# -------------
#
# interface Ethernet1/1
#   switchport access vlan 20
# interface Ethernet1/2
#   switchport trunk native vlan 20
# interface mgmt0
#   ip address dhcp
#   ipv6 address auto-config

- name: Override device configuration of all L2 interfaces on device with provided configuration.
  nxos_l2_interfaces:
    config:
      - name: Ethernet1/2
        access:
          vlan: 30
    state: overridden

# After state:
# ------------
#
# interface Ethernet1/1
# interface Ethernet1/2
#   switchport access vlan 30
# interface mgmt0
#   ip address dhcp
#   ipv6 address auto-config


# Using deleted

# Before state:
# -------------
#
# interface Ethernet1/1
#   switchport access vlan 20
# interface Ethernet1/2
#   switchport trunk native vlan 20
# interface mgmt0
#   ip address dhcp
#   ipv6 address auto-config

- name: Delete L2 attributes of given interfaces (Note This won't delete the interface itself).
  nxos_l2_interfaces:
    config:
      - name: Ethernet1/1
      - name: Ethernet1/2
    state: deleted

# After state:
# ------------
#
# interface Ethernet1/1
# interface Ethernet1/2
# interface mgmt0
#   ip address dhcp
#   ipv6 address auto-config


se
before:
  description: The configuration as structured data prior to module invocation.
  returned: always
  type: list
  sample: >
    The configuration returned will always be in the same format
     of the parameters above.
after:
  description: The configuration as structured data after module completion.
  returned: when changed
  type: list
  sample: >
    The configuration returned will always be in the same format
     of the parameters above.
commands:
  description: The set of commands pushed to the remote device.
  returned: always
  type: list
  sample: ['command 1', 'command 2', 'command 3']
(t
AnsibleModule(tL2_interfacesArgs(t
L2_interfacescC`s;tdtjdt�}t|�j�}|j|�dS(s`
    Main entry point for module execution

    :returns: the result form module invocation
    t
argument_spectsupports_check_modeN(RR	RtTrueR
texecute_modulet	exit_json(tmoduletresult((sS/usr/lib/python2.7/site-packages/ansible/modules/network/nxos/nxos_l2_interfaces.pytmains	t__main__N(t__doc__t
__future__RRRttypet
__metaclass__tANSIBLE_METADATAt
DOCUMENTATIONtEXAMPLEStRETURNtansible.module_utils.basicRtEansible.module_utils.network.nxos.argspec.l2_interfaces.l2_interfacesR	tDansible.module_utils.network.nxos.config.l2_interfaces.l2_interfacesR
Rt__name__(((sS/usr/lib/python2.7/site-packages/ansible/modules/network/nxos/nxos_l2_interfaces.pyt<module>s


<�	


Anons79 File Manager Version 1.0, Coded By Anons79
Email: [email protected]