#!/usr/bin/python
# -*- coding: utf-8 -*-
# Copyright 2019 Red Hat
# GNU General Public License v3.0+
# (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
#############################################
# WARNING #
#############################################
#
# This file is auto generated by the resource
# module builder playbook.
#
# Do not edit this file manually.
#
# Changes to this file will be over written
# by the resource module builder.
#
# Changes should be made in the model used to
# generate this file or in the resource module
# builder template.
#
#############################################
"""
The module file for ios_lldp_interfaces
"""
from __future__ import absolute_import, division, print_function
__metaclass__ = type
ANSIBLE_METADATA = {
'metadata_version': '1.1',
'status': ['preview'],
'supported_by': 'network'
}
DOCUMENTATION = """
---
module: ios_lldp_interfaces
version_added: 2.9
short_description: Manage link layer discovery protocol (LLDP) attributes of interfaces on Cisco IOS devices.
description: This module manages link layer discovery protocol (LLDP) attributes of interfaces on Cisco IOS devices.
author: Sumit Jaiswal (@justjais)
notes:
- Tested against Cisco IOSv Version 15.2 on VIRL
- This module works with connection C(network_cli),
See L(IOS Platform Options,../network/user_guide/platform_ios.html).
options:
config:
description: A dictionary of LLDP options
type: list
elements: dict
suboptions:
name:
description:
- Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1.
type: str
required: True
receive:
description:
- Enable LLDP reception on interface.
type: bool
transmit:
description:
- Enable LLDP transmission on interface.
type: bool
med_tlv_select:
description:
- Selection of LLDP MED TLVs to send
- NOTE, if med-tlv-select is configured idempotency won't be maintained
as Cisco device doesn't record configured med-tlv-select options. As
such, Ansible cannot verify if the respective med-tlv-select options is
already configured or not from the device side. If you try to apply
med-tlv-select option in every play run, Ansible will show changed as
True.
type: dict
suboptions:
inventory_management:
description:
- LLDP MED Inventory Management TLV
type: bool
tlv_select:
description:
- Selection of LLDP type-length-value i.e. TLVs to send
- NOTE, if tlv-select is configured idempotency won't be maintained
as Cisco device doesn't record configured tlv-select options. As
such, Ansible cannot verify if the respective tlv-select options is
already configured or not from the device side. If you try to apply
tlv-select option in every play run, Ansible will show changed as True.
type: dict
suboptions:
power_management:
description:
- IEEE 802.3 DTE Power via MDI TLV
type: bool
state:
description:
- The state of the configuration after module completion
type: str
choices:
- merged
- replaced
- overridden
- deleted
default: merged
"""
EXAMPLES = """
# Using merged
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: enabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
- name: Merge provided configuration with device configuration
ios_lldp_interfaces:
config:
- name: GigabitEthernet0/1
receive: True
transmit: True
- name: GigabitEthernet0/2
receive: True
- name: GigabitEthernet0/3
transmit: True
state: merged
# After state:
# ------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: enabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: disabled
# Rx: enabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: enabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# Using overridden
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
- name: Override device configuration of all lldp_interfaces with provided configuration
ios_lldp_interfaces:
config:
- name: GigabitEthernet0/2
receive: True
transmit: True
state: overridden
# After state:
# ------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
# Using replaced
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
- name: Replaces device configuration of listed lldp_interfaces with provided configuration
ios_lldp_interfaces:
config:
- name: GigabitEthernet0/2
receive: True
transmit: True
- name: GigabitEthernet0/3
receive: True
state: replaced
# After state:
# ------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: disabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# Using Deleted
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
- name: "Delete LLDP attributes of given interfaces (Note: This won't delete the interface itself)"
ios_lldp_interfaces:
config:
- name: GigabitEthernet0/1
state: deleted
# After state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# Using Deleted without any config passed
# "(NOTE: This will delete all of configured LLDP module attributes)"
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: enabled
# Rx: enabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
- name: "Delete LLDP attributes for all configured interfaces (Note: This won't delete the interface itself)"
ios_lldp_interfaces:
state: deleted
# After state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: INIT
#
# GigabitEthernet0/3:
# Tx: disabled
# Rx: disabled
# Tx state: IDLE
# Rx state: WAIT FOR FRAME
#
"""
RETURN = """
before:
description: The configuration as structured data prior to module invocation.
returned: always
type: list
sample: >
The configuration returned will always be in the same format
of the parameters above.
after:
description: The configuration as structured data after module completion.
returned: when changed
type: list
sample: >
The configuration returned will always be in the same format
of the parameters above.
commands:
description: The set of commands pushed to the remote device.
returned: always
type: list
sample: ['interface GigabitEthernet 0/1', 'lldp transmit', 'lldp receive']
"""
from ansible.module_utils.basic import AnsibleModule
from ansible.module_utils.network.ios.argspec.lldp_interfaces.lldp_interfaces import Lldp_InterfacesArgs
from ansible.module_utils.network.ios.config.lldp_interfaces.lldp_interfaces import Lldp_Interfaces
def main():
"""
Main entry point for module execution
:returns: the result form module invocation
"""
required_if = [('state', 'merged', ('config',)),
('state', 'replaced', ('config',)),
('state', 'overridden', ('config',))]
module = AnsibleModule(argument_spec=Lldp_InterfacesArgs.argument_spec,
required_if=required_if,
supports_check_mode=True)
result = Lldp_Interfaces(module).execute_module()
module.exit_json(**result)
if __name__ == '__main__':
main()
Anons79 File Manager Version 1.0, Coded By Anons79
Email: [email protected]
Anons79 Mini Shell